Paxar Monarch 9433 - Manual (Page 40)

3-10 System Administrator’s Guide
Setting the Margin Adjust
Use this option to adjust where the format prints horizontally on the
supply. The range is between -99 to 99. The default is 0.
1. From the Printer menu, select Margin Adj.
Margin Adjust
+00
↵ f +
Use A as shown in the following table:
↵ f +
Press A to Press A to Press A to
Enter
Save the setting Set the position (+00)
1st position
2nd position
3rd position
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
2. When the setting you want is displayed, press A under ↵ to save the
setting. You return to the Printer menu.