Paxar Monarch 9433 - Manual (Page 53)

Setting Up the Printer 3-23
Data Bits
Use this option to set the printer's data bits. Make sure the printer
settings match those at the host.
1. Select Data Bits.
8 Data Bits
Exit
↵ c d
2. Make your selection: 7 Data Bits or 8 Data Bits. For example:
8 Data Bits
↵
3. Press A under ↵ to save the setting.
4. Press F to return to the Serial Comm. menu.
Stop Bits
Use this option to set the printer's stop bits. Make sure the printer
settings match those at the host.
1. Select Stop Bits.
1 Stop Bit
2 Stop Bit
↵ d
2. Make your selection: 1 Stop Bit or 2 Stop Bits. For example:
1 Stop Bit
↵
3. Press A under ↵ to save the setting.
4. Press F to return to the Serial Comm. menu.