Paxar Monarch 9433 - Manual (Page 16)

2-4 System Administrator’s Guide
The first label shows the printer's configuration by packet (A-M).
Refer to the Programmer's Manual for more information. The
second label shows the model number, software version, total
number of inches printed, number of high-energy inches printed,
voltage, contrast, printhead resistance, the number of bad dots,
memory, and any options.
You return to the Test Label menu.
2. Select Test Pattern.
A test pattern label prints and verifies the dots on the printhead
are working. You return to the Test Label menu.
If your printed sample has fewer lines or no lines, keep the
sample and call Service.
Note: You may receive a "Memory Full" error if you are using MPCL
because you need to reallocate memory. Refer to the
Programmer's Manual for more information.