Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 61)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
To modify the RIP (Routing information protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify
RIP Mode:
This parameter determines how the router handle RIP (Routing information protocol). RIP allows it
to exchange routing information with other router. If set to Disable, the gateway does not
participate in any RIP exchange with other router. If set Enable, the router broadcasts the routing
table of the router on the LAN and incoporates RIP broadcast by other routers into it’s routing table.
If set silent, the router does not broadcast the routing table, but it accepts RIP broadcast packets
that it receives.
RIP Version:
It determines the format and broadcasting method of any RIP transmissions by the gateway.
RIP v1: it only sends RIP v1 messages only.
RIP v2: it sends RIP v2 messages in multicast and broadcast format.
60