Planet Technology G.SHDSL.bis Bridge Router GRT-504 User Manual
Page 143
GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
You can create five virtual IP address pool range in range command.
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5>
Message: Please input the following information.
NAT local address range entry number <1~5>: 1
Base address: 192.168.0.2
Number of address: 49
----------------------------------------------------------------------
You can delete virtual IP address range- from 1 to 5- by using delete command.
You can view the virtual IP address range via list command.
To setup global IP address pool, move the cursor “>>” to global command and press enter.
>> range
Edit global IP address pool
interface
Bind address pool to specific interface
delete
Delete global IP address pool
list
Show global IP address pool
You can create five global IP address pool range via range command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
----------------------------------------------------------------------
After configuration global IP address range, you can bind address pool to specific interface via
bind command.
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global ddress range entry number <1~5>: 1
Active interface number <1~8>: 1
----------------------------------------------------------------------
You can delete global IP address range- from 1 to 5- by using delete command.
You can view the global IP address range via list command.
To modify fixed IP address mapping, move the cursor “>>” to fixed command and press enter.
>> modify
Modify fixed NAT mapping
interface
Bind address pair to specific interface
delete
Delete fixed NAT mapping
list
Show fixed IP address mapping
142