Installation, Unpacking the display, Locations and functions of controls – Planar PE1500 User Manual
Page 5
ENGLISH
PE1500 User’s Manual
3
Installation
Please follow the instructions in this chapter to install your LCD Monitor.
Note:
Before connecting your display, first read through the instructions in this chapter and the
safety precautions in the previous chapter.
Unpacking the Display
When you are unpacking the display, make sure that you have the following items:
Ö The LCD monitor
Ö AC power adapter with attached power cable
Ö A power cord
Ö Analog video signal cable
Ö The User's Manual
Note:
Place the display on a flat, sturdy surface. Choose an area free from excessive heat, moisture,
and sunlight.
Locations and Functions of Controls
There are three control buttons and one power button on the front panel of the display, as well as a
LED for power status indication.
You will use the power button located at the lower right side of the front panel of your display to
turn on and off the display.
The functions of the three control buttons which are located at the lower left side of the front panel
of your display. Their functions are described as below: