Planar PE1500 - Manual (Page 15)

ENGLISH
PE1500 User’s Manual
13
If ‘Exit’ is selected, it will exit the “Management” submenu and back to the “Main Menu”.
Doing adjustment in the “Clock/Phase” Submenu
To do adjustment in the “Clock/Phase” submenu you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the clock/phase icon
and highlight it.
3. Use ‘Select’ key to enter the “Clock/Phase” Submenu. It will show up two items for your
further adjustment.
If ｀ Clock＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the
setting of clock. The fullness of the graphic bar as well as the numerical value at the right
corner are also changed accordingly.
Exit
100
EXIT
50
50
50