Doing adjustment in the “color” submenu – Planar PE1500 User Manual

Page 16

Text mode
Original mode

PE1500 User’s Manual

Note:

We recommend you do Auto Setup first. And adjusting the clock setting only if the image

looks incorrect.

｀

Phase＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the

setting of phase. The fullness of the graphic bar as well as the numerical value at the right
corner are also changed accordingly.

Note:

We recommend you do Auto Setup and to see whether the phase needs to adjust or not.

If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.

Doing adjustment in the “Color” Submenu

To do adjustment in the “Color” submenu you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the color icon and

highlight it.