Planar PE1500 - Manual (Page 19)

ENGLISH
PE1500 User’s Manual
17
If ｀H. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the
setting of H. position of the OSD display. The fullness of the graphic bar as well as the numerical
value at the right corner are also changed accordingly.
If ｀V. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the
setting of V. position of the OSD display. The fullness of the graphic bar as well as the numerical
value at the right corner are also changed accordingly.
If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.
Doing Factory Recall
To recall factory settings back you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the factory recall icon
and highlight it.