Bass management 1 sub woofer yes 2 lfe level 0.0db, Sub woofer menu 1 no 2 no/lfe to panel 3 yes – Pioneer PDSP-1 User Manual

Page 30

Changing

Surround Sound

Adjusting the Tone

Calling Up a Room

Sound Setting

Video and Audio

Timing

Compensations

Adjusting

Surround Effects

Displaying the

Data Screen

Sub Woofer / Bass Management

This menu allows you to set the unit for a sub-woofer, and LFE channel ON/OFF.

(Same as steps

on P27, “Test Signal”)

Using the

buttons, select “Bass Management”, and press the ENTER button.

The following screen appears:

Bass Management

1 Sub Woofer

Yes

2 LFE Level

0.0dB

Notes:

LFE means “Low Frequency Effect”.

If “Sub Woofer” is set to “Yes”, use the

buttons to select “LFE level”, then use the

buttons to adjust

the output level.

Setting range: 0.0 dB – 12.0 dB

Using the

buttons, select “Sub Woofer”, then press the ENTER button.

The following screen appears:

Sub Woofer Menu

1 No

2 No/LFE to panel

Yes

Using the

buttons, select either “No,” “No/LFE to panel,” or “Yes,” then press the ENTER

button.

Note:

When you’re finished, you can press the MENU button repeatedly to return to previous screens.

LFE channel output level

Sub Woofer: No
(LFE will not be output from any channel)

Sub Woofer: No/LFE to panel
(LFE is output from digital sound projector)

Sub Woofer: Yes
(LFE is output to Sub Woofer)

“SUB WOOFER OUTPUT connectors”

P13