Pioneer PDSP-1 - Manual (Page 16)

16
Front Panel Rear Panel Remote Control Unit
Recharging the Remote Control Unit
1 Connect the accessory AC adapter to the recharger and a household AC outlet.
2 Place the remote control unit on the recharger, aligning the indents on the remote control unit
with the tabs on the recharger.
Note:
During recharging, the indicator shown below will appear on the upper right corner of the display.
Caution:
Do not use AC adapters other than the one supplied.
Recharging indicator
“Can’t recharge remote control unit” P39
Note:
Illustration depicts U.S. model.