Pioneer PDSP-1 - Manual (Page 25)

25
Using the Digital Sound Pr
ojector
Using the Remote
Control Unit
Watching Television Watching a DVD
Using a Pioneer DVD
Recorder
Selecting the Audio
Mode
Selecting the Audio Mode
Listening to Stereo Sound in Surround Mode
Stereo broadcasts, CD playback and other 2-channel sounds can be enjoyed in surround sound mode.
1 Set the touch panel to the PDSP menu.
From the HOME menu, press ; from other menus, press .
2 Press .
The television screen will display the audio mode.
Each time the button is pressed, the audio mode will change in the following order.
PDSP menu
PLII Movie
PLII Music
Pro Logic
Stereo
Dolby Digital
PLII Movie: Pro Logic II Movie
This mode is designed for use with film soundtracks, and allows
actors’ dialogue to be heard from the most natural direction.
PLII Music: Pro Logic II Music
This mode is designed for use with music sources. The surround
effect recreates the ambience experienced in live performances.
Pro Logic:
The Pro Logic Mode is generally designed for general use with
movie soundtracks. The rear channel track is heard in monaural
surround.
Stereo:
The stereo mode is a two-channel mode; when this mode is
selected, even multi-channel sources are played back in two
channels, and heard from the front right and left.
Notes:
If is pressed during playback of Dolby Digital and other surround sources, the following message will be
displayed:
If is pressed in step 2 , the unit will change to stereo mode.
“Fine Tuning the PLII Music Mode” P35