Pioneer PDSP-1 - Manual (Page 12)

12
Front Panel Remote Control Unit Rear Panel
Rear Panel
The main power switch, power cord socket, and input/output connectors are located on the rear panel.
Turning the Main Power ON/OFF
1 Connect the supplied power cord to the rear panel power cord socket, and then insert the plug
in a household power outlet.
2 Turn the main power ON/OFF by setting the main power switch to the [–] (ON) or [ ° ] (OFF) sides.
Caution:
Do not use any power cord other than the one supplied.
Main power switch
Power cord socket
SUB WOOFER 1 OUTPUT
(sub-woofer output 1)
SUB WOOFER 2 OUTPUT
(sub-woofer output 2)
INPUT 5
(analog audio inputs)
INPUT 2
(analog audio inputs)
INPUT 2
(video inputs)
INPUT 5
(video inputs)
INPUT 4
(video inputs)
MONITOR OUTPUT
(video outputs)
INPUT 1 COAXIAL
(digital audio input)
INPUT 2 OPTICAL
(digital audio input)
INPUT 3 OPTICAL
(digital audio input)
INPUT 4 OPTICAL
(digital audio input)
OUTPUT OPTICAL
(digital audio output)
RS-232C connector
(used by installation technician)