Pioneer PDSP-1 - Manual (Page 21)

21
Using the Digital Sound Pr
ojector
Using the Remote
Control Unit
Watching Television Watching a DVD
Using a Pioneer DVD
Recorder
Selecting the Audio
Mode
Watching Television
Use this menu to operate a connected television.
1
Turn on power to digital sound projector.
2
Turn on power to television.
3 – ,
Select input connected to television sound.
4
Change to television operating menu.
5 TV VOLUME
Reduce television’s built-in speakers so as not to affect sound from digital
sound projector.
6 To next operation.
7 The lower two menu screens are used to operate the television.
Use the arrows on the touch panel to alternate between the two
menus.
1/2 2/2
1/2 2/2
Note:
When is pressed in step 1 , the television operating screen shown in 7 appears, and the
television can be operated without using the digital sound projector. Note that in this case, the item
does not appear on the 2/2 menu, with the result that the remote control unit’s volume button (hard key) must
be used to adjust the television sound volume.
Television Operating Menus (2 screens)
“About the Remote Control Unit Buttons (hard
keys)”
P14
“Table of Remote Control Unit Menu Displays”
P40