Planar PD8130 - Manual (Page 15)

Planar PD8130/PD8150 Installation/Operation Manual 1
PREL
IMINA
RY
1.1
About This Manual
This Owner’s Manual describes how to install, set up and operate the Planar
PD8130/PD8150 Digital Light Processing (DLP™) Projector.
Throughout this manual, the Planar PD8130/8150 1080p DLP Projector is referred
to as the “PD8130/PD8150.”
Target Audience Planar has prepared this manual to help home theater installers and end users
get the most out of the PD8130/PD8150.
Planar has made every effort to ensure that this manual is accurate as of the
date it was printed. However, because of ongoing product improvements and
customer feedback, it may require updating from time to time. You can always
find the latest version of this and other Planar product manuals on-line, at
www.Planar.com.
If You Have Comments
About This Manual...
Planar welcomes your comments about this manual. Send them to
[email protected].
Textual and Graphic
Conventions
Text Conventions: The following conventions are used in this manual, in order to
clarify the information and instructions provided:
• Remote and built-in keypad button identifiers are set in upper-case bold
type; for example, “Press EXIT to return to the previous menu.”
• Computer input (commands you type) and output (responses that appear
on-screen) is shown in monospace (fixed-width) type; for example: “To
change the aspect ratio to Letterbox, type op aspect = 1 . ”
• All keys with functional names are initial-capped, set in bold type and
enclosed in angle brackets. These keys are the following: ,
, , and .
• indicates that you may press either the RETURN or ENTER key on your
keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are
occasionally used to highlight important information, as in this example:
1.
Introduction
A carriage return must be used after each command or
string.
Note