Parker Products OEM650X - Manual (Page 8)

OEM650/OEM650X • INTRODUCTION
1
1 Introduction
Chapter Objective
The information in this chapter will enable you to:
❐ Understand the product’s basic functions and features
OEM650 Description
The OEM650 Drive is intended to be a high-performance basic
engine around which the original equipment manufacturer (OEM)
designs his motion control system. Its single-power DC input makes
it a convenient and cost effective motion control module. The drive
offers a basic set of customer configurable features. These features
are designed to meet the needs of most customers. The OEM650 is
optimized to operate size 23 and 34 motors.
The OEM650 is a bipolar, recirculating, microstepping drive designed
to drive two-phase permanent magnet hybrid step motors. The drive
uses a custom ASIC, surface mount, and MOSFET technologies to
give high performance in a small package while providing short
circuit protection. The OEM650 is compatible with all Compumotor
indexers.
The mechanical design is a fully enclosed product that uses a
heatplate technique to provide a heat dissipation path. The user
must attach the OEM650 module to a suitable mounting surface.
OEM650X Description
The OEM650X Drive/Indexer is the same drive product as the
OEM650, but it includes an indexer (position controller). The
OEM650X is the same size as the OEM650 and it incorporates the
same design technologies (bipolar, recirculating, microstepping drive
designed to drive two-phase permanent magnet hybrid step motors,
custom ASIC, surface mount, and MOSFET technologies).
The indexer utilizes commands from Compumotor’s popular and
easy-to-use X Series Language. The indexer also provides additional
I/O control and communication
OEM350/350X Description
The OEM350/OEM350X is a low power version of the OEM650 drive.
It is designed for use with step motors that have lower current
ratings and higher inductance (10 mH to 80 mH) than Compumotor