16 system tools, 17 system config – Planet Technology SGSW-2402 User Manual
Page 30

26
But, if the system cannot find any matching MAC Address, the following search result will appear:
3.16 System Tools
The available options in “System Tools” are:
System Config
The Spanning Tree Setup Screen
System Information
The IGMP Setup Screen
Change Password
The Stack Setup Screen
Firmware Upgrade
The SNMP Setup Screen
Save or Reset Settings
The Port Security Setup Screen
Message Window
The Mirror Port Setup Screen
Reboot Switch
The Aging Control Setup Screen
Logout
The Address Search Setup Screen
3.17 System Config
This page allow configuring the basic switch information and IP address. The configuration procedure is:
Step 1: Give a description for the system name and location of this switch.
Step 2: Key in the contact information and describe the product of the switch.
Step 3: Enter the IP address and Subnet Mask.
Step 4: Click “Apply” button and save the setting by hitting “Save” button.
Upon making amendments on this page, the screen will appear a message, “Reboot the switch?”. Click on
the ‘Yes’ button to take effect on the changes.