Planet Technology SGSW-2402 - Manual (Page 25)

21
Figure 3-14. Port Security page
3.12.1 Setting Up Procedures
Step 1: Select the port that you want to add in the MAC Address
Step 2: Key in the MAC Address in the field provided, e.g. 00-80-40-E8-85-12, and click “Add” button
The system will then add in the New MAC Address into the listing on the right side of the screen.
3.12.2 Delete MAC Address
If you want to delete MAC Address(es), simply follow the procedures shown below:
For deleting individual MAC Address
Step 1: Select a MAC Address and clink on "Del ->" button.
The system will prompt you to confirm your action:
Step 2: Choose “OK” button to confirm.
The particular MAC Address will be successfully deleted!
For deleting ALL MAC Addresses
Step 1: Click on "Delete All" button and the system will again prompt you the message as shown as
above.
Step 2: Choose "OK" button to confirm.
All MAC Addresses will be deleted immediately!
3.13 Mirror Port
3.13.1 Using Mirror Port to Monitor Traffic
This function allows you to set up a ‘mirror’ port of any specified port(s) or VLAN, such that you can
monitor the traffics of the monitored port(s) or VLAN without intervening them. In effect, the traffics on the
monitored port(s) VLAN are replicated on the mirror port that you can use a protocol analyzer to analyze
the traffic for specific problem.