Pioneer DVD Navigation Unit AVIC-80DVD - Manual (Page 152)

150
Other Functions
Customize the settings to suit your taste and environment.
■Displaying the SET UP MENU
1 Press A.MENU (AUDIO) button in each source display.
2 Press
5 or ∞ to select “SETUP”, and press A.MENU (AUDIO) button.
The SETUP MENU is displayed as follows:
VIDEO SETTING, AUTO FLAP, REAR MONITOR
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
➲
Select BACK in the MENU display or press BACK/FUNC button to return to the previous
display.
➲
To return to the playback display, press BAND/ESC button.
■Selecting the video
Set so that only the display video can be selected. The display for this MENU is the same
regardless of which source you operate from.
1 Press
5 or ∞ to select “VIDEO SETTING” from the SETUP MENU, and press A.MENU
(AUDIO) button.
2 Press
2 2 2 2 / 3 3 3 3 to select “VIDEO”.
Press
2 or 3 until the desired video setting appears in the display.
OFF (off) - VIDEO (video) - BACK UP CAMERA (back up camera) - M-DVD (Multi-
DVD)
➲
If the equipment is connected to a RCA video input, choose VIDEO to view video of the
equipment.
➲
When using a DVD player connected with an RCA cable, if you do not select M-DVD,
there will be no picture even if you switch sources.
➲
When using a DVD player connected with an AV-BUS cable, do not select M-DVD. If
you do, there will be no picture.
➲
If BACK UP CAMERA is not connected, do not select BACK UP CAMERA.
➲
If you select “BACK UP CAMERA”, press
∞ to move to BACK UP CAMERA POLARITY,
or use
2 or 3 to select BATTERY and GROUND.