Philips Indoor Luminaires - Manual (Page 24)

Philips indoor luminaires 11.23 Lighting Controls
Lighting Controls
General-purpose Products
Light regulator for incandescent lamps,
high-voltage halogen lamps and low-
voltage halogen lamps with electronic
transformers. Max. load is 1000 VA, to
be used in combination with either a
Trios unit, LightMaster Modular (1-10
V) controller or LPS100.
Product ID EOC
LRD8010/10 DIMMER 1KVA
ELECTRONIC TX 515731 99
LRD8010
Interlink cable of 1 m length with
modular plugs at both ends for
interconnection of multifunctional
light controllers so that the connected
sensors can be shared by several
controllers.
Product ID EOC
LCC8011/00 CABLE
INTER RJ12M-RJ12M 1M 515939 99
Extension cables of 5 m length
(LCC8012) and 20 m length
(LCC8013) with modular plugs and
sockets to increase the distance
between sensors (infrared receivers,
light sensors and movement detectors)
and the corresponding controllers.
Product ID EOC
LCC8012/00 CABLE
EXT RJ12M-RJ12F 5M 515953 99
LCC8013/00 CABLE
EXT RJ12M-RJ12F 20M 515977 99
Cable of 5 m length with modular
plugs at both ends for the connection
of sensors to the various types of light
controllers.
Product ID EOC
LCC8014/00 CABLE
SENSR RJ12M-RJ12M 5M 516370 99
Interlink cable of 5 m length with
modular plugs at both ends for
interconnection of Trios light
controllers. The cable is intended to
distribute (only) the RC5 signal from
a push-button interface over the
connected controllers, especially in
centrally controlled Trios applications.
Product ID EOC
LCC8015/00 CABLE
IR RJ12M-RJ12M 5M 517117 99
Indoor_2008_Chapter_11_LIS.indb 23 20-05-2008 14:28:45