Philips Indoor Luminaires - Manual (Page 22)

Philips indoor luminaires 11.21 Lighting Controls
Lighting Controls
General-purpose Products
Compact advanced movement
detector that features variable delay-
to-off via DIP switch and can be part-
shaded to limit coverage. The sensor
is powered via the additional modular
plug-in (RJ12) connector cable that
attaches it to a lighting controller. The
sensor is suitable for both recessed and
surface mounting. Mounting height is between 2.5 m and 3.5 m.
Product ID EOC
LRM8114/00 SENSR MOV DET 519067 99
LRM8114
Surface mounting box for the LRI8134
and LRM8114 sensors. Comes with
cut-out holes for most common cable
trunking.
Product ID EOC
LRH8100/00 SENSR SURFACE BOX 519203 99
LRH8100
Infrared receiver for remote control of
lighting systems and other building-
related functions. The unit is especially
intended for “invisible” mounting
behind a false ceiling. Only a thin plastic
optic protrudes from the ceiling. More
infrared receivers can be connected
in parallel to cover large or odd-
shaped rooms. It is powered from the corresponding controller, not requiring
an external power supply unit. Electrical
connections with a fixed cable (1 m.)
with modular plug. Mounting height 2.5
to 3 m.
Product ID EOC
IRR8125/10 SENSR IR NV 731315 99
IRR8125
Wall-mounted passive infrared
movement detector for energy-saving
solutions in indoor lighting applications
(automatic light switching based on
occupancy). It detects the slightest
movement within a range of 25 m.
Adjustable switch-off delay time of up
to 35 minutes. Electrical connections
via an additional sensor cable with a modular socket (“snap-in”). The daylight
override function prevents the lights
being switched on if enough daylight is
available.
Product ID EOC
LRM8115/00 SENSR MOV
DET LONG 517223 99
LRM8115/ LRM8116
LRL5002/10 The solar level detector
monitors the level of ambient light at
its location. More then one solar level
detector may be used to monitor
daylight levels in different areas, or
aspects of a building. The unit provides
input to the lighting management
system in order to allow use of local
light level information. The detector is normally connected to the sensor input
of a Lighting Control Module (LCM)
Product ID EOC
LRL5002/10 SENSR
LIGHT EXT 731858 99
Indoor_2008_Chapter_11_LIS.indb 21 20-05-2008 14:28:38