Philips Indoor Luminaires - Manual (Page 23)

Philips indoor luminaires 11.22 Lighting Controls
General-purpose Products
Push-button interface. RC5 code
generator with digital inputs for the
connection of push-buttons. Intended
for manual control of light controllers
and for coupling to other systems
such as building management systems.
The unit is connected to the infrared
remote control input of the controller.
Combination with an IR receiver is possible. Codes generated depend
on the input terminals used; 20
combinations are possible. Different
sets of codes can be selected with a
rotary switch. The unit is powered from
the corresponding controller.
Product ID EOC
LCU8020/00 INTERF
PUSHBUTTON 516561 99
LCU8020
Manual rotary potentiometer with
microswitch for recessed mounting.
In combination with one or more
electronic 1-10 V HFR ballasts,
electronic light regulators or Trios
controllers, it serves to control the
light level of fluorescent lamps, halogen
lamps or incandescent lamps.
Product ID EOC
LPS100/00 POTSW 1-10V DIM 558039 99 LPS100/00
Manual rotary potentiometer with
microswitch for surface mounting.
In combination with one or more
electronic 1-10 V HFR ballasts,
electronic light regulators or Trios
controllers, it serves to control the
light level of fluorescent lamps, halogen
lamps or incandescent lamps.
Product ID EOC
LPS100/01 POTSW 1-10V DIM 558060 99
LPS100/01
Light regulator for incandescent
lamps, high-voltage halogen lamps
and low-voltage halogen lamps with
electronic transformers. To be used in
combination with either a TRIOS unit,
LMM (1-10V) controller or LPS100.
Max. load is 1000 VA.
Product ID EOC
LRD8000/10 DIMMER 1KVA
MAGNETIC TX 515717 99
LRD8000
Wall-mounted passive infrared
movement detector for energy-saving
solutions in indoor lighting applications.
It detects movement within an angle
of 90º (maximum range 15 m at a
mounting height of 2.1 m). Adjustable
switch-off delay time of up to 35
minutes. Electrical connections via an
additional sensor cable with a modular socket (“snap-in”). The daylight
override function prevents the lights
being switched on if enough daylight is
available.
Product ID EOC
LRM8116/00 SENSR MOV
DET WIDE 518411 99
Indoor_2008_Chapter_11_LIS.indb 22 20-05-2008 14:28:42