Phonetics 1108 - Manual (Page 99)

Appendix A: Troubleshooting
87
2.
The Model 1108 will not answer the telephone when called for a Status Report or alarm acknowledgment.
The Model 1108 must be connected to a standard (2-wire analog) telephone line,
not
a digital extension
to a phone system. If the
unit will not dial out and the factors previously listed have been ruled out, try connecting the unit to a standard residential telephone line.
e)
The Model 1108 is connected to an incompatible telephone line.
a)
Rings Until Answer is incorrectly programmed.
Recheck programming of Rings Until Answer
. Refer to Chapter 4, Section 4.5.1.
b)
The Model 1108 is connected to an incompatible telephone line.
Some telephone systems will not allow the telephone to ring beyond 4 rings. If your Model 1108
’s Rings Until
Answer is set at
more than 4 rings, you may not be able to access the unit.
T
ry setting the Rings Until
Answer to less than 4 rings. If this does not correct the problem, it may indicate telephone line incompatibility
. In this case,
try connecting the Model 1108 to a standard, residential telephone line.