Special dialing sequences, 3 tone or pulse dialing, 4 special dialing – Phonetics 1108 User Manual
Page 39: Chapter 4: communications programming 27, Press enter. the model 1108 will say, “enter, The model 1108 can dial out in pulse or touch-tone, Press tone, Enter
Chapter 4: Communications Programming
27
3.
Press the number key (from 1 to 8) representing the
telephone number you want to erase.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
TEMP LIMITS
5
CALIBRATE
6
4.
Press ENTER. The Model 1108 will say, “Enter.”
ENTER
TONE
PM
4.3 Tone or Pulse Dialing
The Model 1108 can dial out in pulse or Touch-Tone
™
. Select
the type of dialing, in either pulse or tone, depending upon the
type of service provided by your telephone company. The
default is tone.
To program for either pulse or tone:
1.
Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2.
Press TONE.
ENTER
TONE
PM
The Model 1108 will respond: “Off” to indicate that tone
dialing is off and pulse is enabled, or “On” to indicate
that tone dialing is on and pulse is disabled.
3.
Repeat key sequence to switch between settings.
4.4 Special Dialing
The Model 1108 has provisions for special dialing sequences.
Special dialing sequences allow:
• Dialing that requires an access number to connect with
an outside line.