Phonetics 1108 - Manual (Page 64)

Sensaphone ® Model 1108 User’s Manual
52
5.2.1 Changing Enabled/Disabled Input Status
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press the number (1 to 8) of the selected input to enable/
disable. The Model 1108 says “Off” to indicate disabled
or “On” to indicate enabled.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
TEMP LIMITS
5
CALIBRATE
6
5.2.2 Verifying Enabled/Disabled Input Status
1. Press WHAT IS.
WHAT
IS
*
2. Press STATUS.
STATUS
CONFIGURE
The Model 1108 audibly recites the current status of every
input. In a Status Report, each input is first identified by its
input number, followed by a report that specifies parameters
currently affecting that input. If an input is disabled, the word
“Off” immediately follows the number recited for that input.
For example, input 3 is configured as a normally open, dry
contact input. During the Status Report:
• If disabled, the Model 1108 recites:
“Number 3—Off—OK,” for input 3.
• If enabled, the Model 1108 recites:
“Number 3—OK,” for input 3.