Status, Chapter 3: quick start 17, Step 2: set the id number – Phonetics 1108 User Manual
Page 29: Press set, Press configure, Press id number
Chapter 3: Quick Start
17
4.
Press SET.
SET
#
5.
Press CONFIGURE.
STATUS
CONFIGURE
6.
The Model 1108 will audibly recite the new configuration
for each of the eight inputs, responding with “OK,” if it
detects N.O. (normally open), “beep-OK,” if it detects
N.C (normally closed) or “Temperature,” if it detects
temperature (regardless of whether all the inputs have
attached sensors or not). If an input is unused, it is treated
as normally open.
Step 2: Set the ID Number
It is recommended that you set the ID number to reflect the
telephone number on which the Model 1108 is installed.
1.
Press SET.
SET
#
2.
Press ID NUMBER.
0
ID NUMBER
POWER
3.
Using the number keys, enter the digits (up to 16 are
permitted) for the ID number. The Model 1108 will recite
the digits as they are pressed.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
0
ID NUMBER
POWER
9
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
LISTEN TIME
SOUND
TEMP LIMITS
5
CALIBRATE
6