Phonetics 1108 - Manual (Page 44)

Sensaphone ® Model 1108 User’s Manual
32
3. Press any unassigned number key (from 1 to 8) to
represent the new telephone number entry.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
TEMP LIMITS
5
CALIBRATE
6
4. Enter the complete telephone number using the number
keys. The Model 1108 will recite the digits as they are
pressed.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
0
ID NUMBER
POWER
9
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK LISTEN TIME
SOUND
TEMP LIMITS
5
CALIBRATE
6
5. Press CODE. This instructs the Model 1108 to wait for
the telephone call to be answered by the beeper or pager
service. (A voice message will not occur—only digital
tones are used.) Note that CODE may not work with
beepers where there is no ring before the beeper connects.
If that proves to be the case for your particular beeper,
skip the CODE step and proceed from Step 4 to Step 6.
CODE
MUTE
6. Now press PAUSE once to activate a four second delay.
This assumes the call is answered by a beeper/pager
service that immediately delivers a prerecorded voice
message. PAUSE may be pressed more than once to
program more time for the beeper/pager service to finish
its message. Each press of PAUSE allocates four addi-
tional seconds. The Model 1108 will beep with each
press.
RING/TAD
PAUSE
AM