Polycom SpectraLink 1725-36033-001 - Manual (Page 35)

Configuring the SpectraLink 8000 SVP Server
PN: 1725-36033-001_G.doc 35
Change Password
If desired, the password to access the SVP Server may be changed.
A password must meet the following requirements:
• It must be more than four characters, but cannot exceed 16
characters.
• The first character must be a letter.
• Only numbers and letters are allowed.
• No dashes, spaces, or punctuation marks, etc. are allowed.
Select Change Password from the main menu. A screen similar to the
following will appear:
Enter the information and either select Set Password or press the S key
to set the new password.
If you are using the
Send All option as described above in Network
Configuration every SVP Server must have the same password. Please
review that section for additional information about using Send All .
If you forget a password, call Polycom Customer Service for
assistance.