Reset system, Reset all svp servers – Polycom SpectraLink 1725-36033-001 User Manual
Page 32
SpectraLink 8000 SVP Server: Administration Guide for SIP
32
PN: 1725-36033-001_G.doc
Reset System
If this option is selected, you will be prompted to reset the SVP Server
upon exiting this screen.
Reset all SVP Servers
If this option is selected, you will be prompted to reset all SVP Servers
upon exiting this screen. This is necessary if you have changed
configurations on other SVP Servers by using the
SendAll
option.
The SVP Server should be reset at the end of any maintenance
procedure that requires a reset either via
Maintenance Lock
or
manually via
Reset System.
Note that resetting the SVP Server will terminate any calls in
progress. See the Network Status section for information on
determining if active calls exist.
This manual is related to the following products: