Polycom SpectraLink 1725-36033-001 - Manual (Page 27)

Configuring the SpectraLink 8000 SVP Server
PN: 1725-36033-001_G.doc 27
Hostname
(Optional) change the default host name, if desired. This is the name
of the SVP Server to which you are connected, for identification
purposes only. You cannot enter spaces in this field. Valid characters
are numbers 0-9, letters a-z A-Z, or an underscore _.
The host names for each SVP Server and OAI Gateway on the
system must be unique.
Subnet Mask
The network administrator must define the subnet mask.
Default Gateway
The IP address of a router on the local subnet.
SVP-II TFTP Download Master
This entry indicates the source of software updates for the SVP Server.
See Chapter 5 Software Maintenance for more information. Valid source
location entries are:
• NONE : disables.
• IP Address : The IP address of a network TFTP server that will be
used to transfer software updates to the SVP Server.
DNS Server and DNS Domain
These settings are used to configure Domain Name services. Consult
your system administrator for the correct settings. These can also be
set to DHCP . This will cause the DHCP client in the SVP Server to
attempt to automatically get the correct setting from the DHCP server.
The DHCP setting is only valid when the IP address is also acquired
using DHCP.
WINS Servers
These setting are used for Windows Name Services. Consult your
system administrator for the correct settings. These can also be set to
DHCP . This will cause the DHCP client in the SVP Server to attempt to
automatically get the correct setting from the DHCP server. The