Panasonic KX-HGC200 - Manual (Page 44)

44
Setting up Your Computer
Confirming the network protocols
After the device driver and the Host Network Manager have been installed
to a wireless computer, setup of the network protocols is necessary to
each wireless computer.
1 From the Start menu, point to Settings, then click Control Panel.
2 Double-click the Network icon.
≥ If you are using Windows Me and can not find the Network icon, click
view all Control Panel options to show the Network icon.
3 Make sure the following protocols are on the The following
network components are installed list.
≥ NetBEUI->Panasonic 11Mbps Wireless LAN PC Card
≥ TCP/IP->Panasonic 11Mbps Wireless LAN PC Card
≥ If the protocols does not appear, install them to your computer first,
referring to the manual of your computer or Windows.