Panasonic KX-HGC200 - Manual (Page 28)

28
“ Installing the KX-HGC200 to a Computer
Helpful hints
≥ If you are using an external CD-ROM drive that is connected
via the PCMCIA PC card slot of the computer and no other PC
card slot is available, follow the steps below before installing
the KX-HGC200.
1. Connect the CD-ROM drive to the PC card slot of the computer
and confirm that it works properly.
2. Place the 11Mbps Wireless LAN Setup CD-ROM in the
CD-ROM drive.
3. On your desktop, double-click the My Computer icon, then
double-click the CD-ROM drive icon.
4. Select all the files and folders contained in the CD-ROM drive
and copy them to a desired directory of your computer.
5. Remove the CD-ROM from the CD-ROM drive.
6. Remove the CD-ROM drive from the PC card slot of the
computer.
≥ If your computer has two PC card slots (upper and lower):
Insert the KX-HGC200 to the upper slot. When the KX-HGC200 is
inserted in the lower slot, the internal antenna of the KX-HGC200
may interfere with usage of the upper slot.