Panasonic DMP-BDT110 - Manual (Page 8)

8
VQT3B58
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
LAN
10BASE-T/100BASE-TX
WIRELESS LAN
ADAPTOR
COMMUNICATION
CAMERA
LAN
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
Back of the unit
[BDT110]
∫ Via an HDMI AV OUT terminal (High quality)
– It is possible to play back 3D videos and 3D still
pictures by connecting this unit with a 3D compatible
TV.
∫ Via a VIDEO OUT terminal (Standard quality)
≥ Set “HDMI Audio Output” to “On” (> 32).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 26).
≥ Connect terminals of the same color.
LAN
E-T/100BASE-TX
HDMI IN
HDMI cable
LAN
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
AUDIO IN
R L VIDEO IN
Audio/Video cable
VQT3B58~Body_eng.fm 8 ページ ２０１０年１２月８日 水曜日 午後４時５３分