Panasonic DMP-BDT110 - Manual (Page 10)

10
VQT3B58
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated (
15)
≥ You can enjoy BD-Live ( 19)
≥ You can enjoy VIERA CAST ( 23)
≥ You can access other devices (Home Network) ( 24)
For details about connection method, refer to the
instructions supplied with the connected equipment.
∫ LAN cable connection ∫ Wireless LAN connection
– [BDT210] : Wireless LAN is built in. (There is no need to
connect a Wireless LAN Adaptor.)
– [BDT110] : Connect the Wireless LAN Adaptor
DY-WL10 (optional).
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ [BDT110] : Only the Wireless LAN Adaptor DY-WL10
(optional) can be used.
≥ [BDT110] : Read the operating instructions for the Wireless
LAN Adaptor DY-WL10 (optional) thoroughly when using
it.
≥ For up to date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
≥ [BDT110] : To simultaneously connect the Wireless LAN
Adaptor DY-WL10 (optional) and a LAN cable, use the
extension cable supplied with the DY-WL10.
LAN
10BASE-T/100BASE-TX
COMMUNICATION
CAMERA
Broadband router, etc.
LAN Cable
LAN Cable
Modem
(Broadband)
*Provided by ISP
WIRELESS LAN
ADAPTOR
COMMUNICATION
CAMERA
LAN
10BASE-T/100BASE-TX
Wireless router, etc.
Wireless LAN Adaptor
LAN Cable
Modem
(Broadband)
*Provided by ISP
[BDT110]
DMP-BDT110_115_210_VQT3B58_eng.book 10 ページ ２０１０年１２月６日 月曜日 午前１０時１６分