Pioneer PRO-1120HD - Manual (Page 16)

06 Preparation
16
En
Right side
Installing the Media Receiver vertically
You can use the supplied stand to install the Media Receiver
vertically.
1. Insert the stand into the side of the Media
Receiver.
2. Secure the stand with the supplied screws.
Screws
POWER
ON STANDBY REC TIMER DATA ACQUISITION
POWER
ON
STANDBY
REC TIMER
DATA ACQUISITION
Installing the Media Receiver
POWER ON STANDBY REC TIMER DATA ACQUISITION
Plasma Display
Media Receiver
(vertical installation)
(horizontal installation)
System cable (approx. 3 m/9.8 feet)
• Do not place a VCR or any other device on the top of the
Media Receiver.
• When installing, allow enough space on the sides and
above the Media Receiver.
• Do not block the side cooling vents or the rear ventila-
tion fan opening of the Media Receiver.
Over 10 cm
(3
15/16 inches)
Over 5 cm
(2
inches)
Over 5 cm
(2
inches)
POWER
ON
STANDBY
REC TIMER
DATA ACQUISITION
Over 5 cm
(2
inches)
Over 5 cm
(2
inches)
Over 5 cm
(2
inches)
Over 5 cm
(2
inches)
Over 10 cm
(3
15/16 inches)