Philips DECT 627 - Manual (Page 4)

Icons on the handset & base display 3
Icons on the handset display
The display gives information about the operation of your telephone.A total of 8 icons can
be shown in the headline of the display :
When charging, the battery bars scroll from empty to full status.
When the handset discharges, the battery shows the status :
Full , 2/3 , 1/3 and
empty .
When being used for the first time, it is sometimes necessary to wait until the battery is
sufficiently charged before the icons appear on the display.
The handset is registered and in range of the base. When blinking, this
symbol indicates that the handset is not registered to the base or out of
range.
The ringtone is deactivated.
The alarm clock is activated.
An external call is in progress. When blinking, this symbol indicates that
there is an incoming external call in progress or that the line is already
busy.
An internal call is in progress. When blinking, this symbol indicates that
there is an incoming internal call.
The keypad is locked.
The handset loudspeaker is activated.
Icons on the base display
only DECT 627
The remote access code is activated.
New unread message(s) on answer machine.
Old message(s) on answer machine, already read.
The answer machine is ON.
Indicates the type of outgoing message.
Indicates the number of rings before the answer machine will start playing
the outgoing message.
Call screening ON/OFF
The display of the base DECT 627 gives information about the answer machine and the
settings.
Date (DD / MM) Time (HH : MM )
Number of messages
New message(s) (SMS, call log entry or voice mail).
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 3