Philips DECT 627 - Manual (Page 12)

Declaration of conformity 11
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate
disposal of your eventual waste.
A financial contribution has been paid to the associated national recovery & recycling system.
The labelled packaging material is recyclable.
DECT TM is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.
We,
PHILIPS Consumer Electronics
Route d'Angers
72081 Le Mans Cedex 9
France
Declare that the products DECT62xx are in compliance with ANNEX IV of the R&TTE-Directive
1999/5/EC and then with the following essential requirements :
Article 3.1 a: (protection of the health & the safety of the user)
Safety: EN 60950-1 (10/2001)
SAR: EN 50371 (2002)
Article 3.1 b: (protection requirements with respect to electromagnetic compatibility)
EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)
Article 3.2: (effective use of the radio spectrum)
Radio : EN 301 406 V1.5.1 (2003)
The presumption of conformity with the essential requirements regarding Council Directive
1999/5/EC is ensured.
Date : 20/05/2005 Le Mans
Product Quality Manager
Home Communication
Using GAP standard compliance
The GAP standard guarantees that all DECT TM GAP handsets and base stations comply with
a minimum operating standard irrespective of their make.Your DECT 623/627 handset and
base station are GAP compliant, which means the minimum guaranteed functions are :
register a handset, take the line, receive a call and dial.The advanced features may not be
available if you use another handset than a DECT 623/627 with your base station (except
with DECT 723/727 handsets).
To register and use your DECT 623/627 handset with a GAP standard base station of a
different make, first follow the procedure described in the manufacturer’s instructions, then
follow the procedure described on page 43.
To register a handset of another make to the DECT 623/627 base station, place the base
station into registration mode (page 43), then follow the procedure in the manufacturer’s
instructions.
Declaration of conformity
0168
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 11