Configuration mode, Handset power off and on, Keypad lock/unlock – Philips DECT 627 User Manual
Page 15: Handset power off/on and keypad lock/unlock
Configuration mode / Handset power OFF/ON & keypad lock/unlock
14
Configuration mode
Before using your DECT 623/627, you need to configure it according to the country of use.
Install the batteries.After a few minutes of charging, the configuration screen appears.
Browse
through the different countries.
Press
SELECT to choose the country that suits you.
Browse
through the list of operators.
Press
SELECT to choose your operator.
Your phone is ready to be used.
If you need to re-configurate your DECT 623/627, see page 40.
Note: If
BACK is pressed, the handset will show the country selection screen again.
Handset power OFF and ON
To power the handset OFF or ON long press the
key.
Keypad lock/unlock
Long press the
key to lock/unlock the keypad in idle mode.
Country dependent feature
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 14