Philips T-SMART DBS-EX23-530 - Manual (Page 48)

Programming Initial ISDN Options Quick-Start Programming
3-6 DBS-EX22-530 Issued 10/23/98
7. Specify which trunk channels are used for ISDN (page 4-28).
Master Cabinet Setup
Note:Refer to “Typical Central Office Configurations” on page 3-10 for
setting below options. Default setting are in BOLD.
8. Set up master span:
Address FF2 (1-64)# 21# (5)#
Options 0= Loop start
1=Ground start
2=DID
3=T1
4=CID
5=ISDN
Address FF1 9# 4# 4# 5# 1# (0-1)# Network Type
Options 0-Public
1-Private
Address FF1 9# 4# 4# 5# 2# (0-1)# Auto Progress
Options 0-Disable
1-Enable
Address FF1 9# 4# 4# 5# 3# (0-2)# NSF
Options 0-None
1-SDN
2-MegaCom
Address FF1 9# 4# 4# 5# 4# (0-3)# ISDN CO Type
Options 0-4ESS
1-5ESS
2- Reserved
3- DMS100