Philips T-SMART DBS-EX23-530 - Manual (Page 112)

Appendix A. CPC-EX 2.3 Feature Update Section 530-ISDN Ref.
Page A-22 DBS Manual - Revised April 2000 DBS-2.3-400
8 Long distance Carrier
InterLATA (PIC) Identifies the carrier who will provide long
distance access.
9 Long distance Carrier
(IntraLATA) (LPIC) Identifies the carrier who provides access for con-
nections that are not local but are still within the
local LATA.
1
0 Request date of installation
1
1 Facility type ISDN PRI
1
2 Facility quantity 1 or 2 spans
NOTE: The following items must be provided on a per span basis.
1
3 Signaling code DS-1 (1.544 Mbps)
1
4 Line coding B8ZS (Binary 8 Zero Substitution)
1
5 Framing Format ESF (Extended Superframe)
1
6 Bearer configuration Voice or Voice/Data
1
7 Quantity of B (bearer)
channels 23B + 1D - Max. setting (must have 1 D channel)
Or XB + 1D where X is 1-23 for a fractional span
1
8 Call type Two Way
1 Quantity of phone numbers A block of 20 numbers is generally assigned.
9 Note: With DID, the total number of telephones
will exceed the total number of B channels.
2
0 Number of incoming digits
to CPE (Customer Premise
Equipment - DBS) Select 4 digits. Used with DID
2
1 ISDN PRI Protocol 5ESS Custom, DMS-100 Custom (NTNAPRI) or
4ESS
2
2 Glare Resolution CPE yield to CO
2
3 Channel selection used by
CO High-to-Low B-channel selection
# Typical Info for CO Comments (examples)