Philips T-SMART DBS-EX23-530 - Manual (Page 109)

DBS-2.3-400 DBS Manual - Revised April 2000 Page A-19
Slave Cabinet Set-Up
Refer to “Typical Central Office Configurations” for setting the following
options. Default settings are bold.
Note: Observe the following Special Installation Note when adding a second
cabinet:
If you are adding a second cabinet (slave) to an existing installation that has a
Primary Rate span configured, you must re-database the number of ISDN
channels in the Master cabinet. The re-dimensioning of the system to the new
double cabinet (master/slave) configuration
(0-23) to be reset to the default value of zero (0).
Set up Slave Span
0-Public
1-Private
0-Disable
1-Enable
0-None
1-SDN
2-MegaCom
0- 4ESS
1- 5ESS
2- Reserved
3- DMS-100
0-Send as is
1-Deduct 0 1 1 from the code
causes
(0-1) Network Type
(0-1) Auto Progress
(0-2) NSF
(0-3) - ISDN CO Type
(0-1) ISDN International
Dial Code Deduction