Philips T-SMART DBS-EX23-530 - Manual (Page 110)

Appendix A. CPC-EX 2.3 Feature Update Section 530-ISDN Ref.
Page A-20 DBS Manual - Revised April 2000 DBS-2.3-400
0-Send as is
1-Deduct 1 from the code
0-Determine Type and Plan
1-Type and Plan always set to Unknown/Unknown
Reprogram the DIDs:
Turn the power switch OFF, and then back ON again
Operation
N/A
Notes
UNLESS STATED ALL OTHER DEFAULT VALUES ARE CORRECT.
Typical Central Office Configurations
Lucent (AT&T) 4ESS
• CO Type (0) 4ESS
• NSF- None (0) or MegaCom (2) - Depends on service requested from CO.
• ISDN International Code Deduct 0 1 1
- Set to (1) to deduct 0 1 1 from the CO Setup message.
• ISDN Long Distance 1 Code Deduction
• Set to (1) to deduct 1 from the CO Setup message.
Lucent (AT&T) 5ESS
• CO Type (1) 5ESS
(0-1) ISDN Long Distance Code Deduction
(0-1) ISDN Type and Plan
Option
(1-64) (0000-9999)