Polycom KIRK 14158600-HD - Manual (Page 10)

Polycom Kirk 5020-5040 User Guide Battery Information
10 Polycom, Inc.
2 Lift off back cover.
3 Insert battery with the label readable. Align the contacts of the battery with
the corresponding connectors on the battery compartment and insert in
the direction of the arrow.
Warning: Make sure that the contacts of the battery and the connectors of
the battery compartment are aligned before sliding the battery in the
direction of the arrow.
4 Press back cover back in locked position (when you hear a click the back
cover is in position).
Note: The product label, including the CE logo, can be found in the battery
compartment.
Charging Battery
When charging battery for the first time, it is necessary to leave handset in
charger for 14-16 hours for the battery to be fully charged.
During normal operation, it takes approximately 6 hours to charge the handset
from fully discharged to its full capacity.
Turning the backlight off reduces
charging time with approximately 2 hours (refer to “Turning Backlight Off” on
page 57 ).