Polycom SpectraLink 1725-36092-001 - Manual (Page 17)

Polycom® SpectraLink® 6020 Wireless Handset User Guide
October, 2011 | 1725-36729-001_D.docx 17
• Any battery which exhibits swelling, cracking or other abnormality should be disposed of
promptly and properly.
Charging Tips
• Overnight charging is best done while the handset is turned off.
• If the handset does not charge, clean Battery Pack, charger and handset contacts.
• If multiple Battery Packs are supplied with your handset, Polycom recommends that each be
fully charged upon receipt to prolong battery life. Battery Packs will slowly lose charge if
unused. To maintain battery potential, charge unused Battery Packs occasionally or alternate
Battery Pack use.
Charging Status
The handset display and the LED on the Dual and Quad Chargers indicate whether or not charging is
occurring or completed or if a Battery Pack failure has been detected.*
The Single Charger does not have an LED indicator.
Handset/LED Charging Status
Charging…
LED Solid On
The Battery Pack in the handset is charging.
Note that in the Dual Charger, the handset’s Battery Pack
takes charging precedence, and when it is finished
charging, the single Battery Pack in the rear slot will
charge.
Charge Complete The Battery Pack in the handset has finished charging.
LED Off Battery Pack fully charged, empty slot, or unit is not
powered.
Battery Failure
LED Flash
Error. Battery Pack not able to be charged. Reinsert
Battery Pack or replace Battery Pack.