Polycom SpectraLink 1725-36092-001 - Manual (Page 27)

Polycom® SpectraLink® 6020 Wireless Handset User Guide
October, 2011 | 1725-36729-001_D.docx 27
Appendix C: Safety Information
Each SpectraLink family of products only works with other members of the same family. If
you have any questions about product compatibility, contact your system administrator.
SpectraLink 8000/6020 Series
The SpectraLink 6020 Wireless Telephone shares accessories with the SpectraLink
8020/8030 Wireless Telephone models. Use only the following SpectraLink products with
your SpectraLink 6020 Wireless Telephone as identified by the model number located on
the label of the product.
SpectraLink 6020 Wireless Telephone
602X
Desktop Charger PCS1850
Dual Charger PCD1850
Quad Charger PCQ1850
Standard Battery Pack PBP0850
Extended Battery Pack PBP1300
UltraExtended Battery Pack PBP1850
Industry Canada Notice
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should not exceed the equivalent
isotropically radiated power (EIRP) necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Chargers and Battery Packs
• Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to
freezing temperatures or direct sunlight.
• Do not place anything in the charger other than the handset or single Battery Pack as
appropriate to avoid bending the contacts. Bent contacts can keep the Battery Pack from
charging.
• Only use SpectraLink 8400 Series Battery Packs with SpectraLink 8400 Series Chargers.