Polycom SpectraLink 1725-36092-001 - Manual (Page 10)

Polycom® SpectraLink® 6020 Wireless Handset User Guide
October, 2011 | 1725-36729-001_D.docx 10
Lock the keypad
Press the Cfg softkey, then NavOK. Navigate to Phone Settings in the Config Menu for Keypad Autolock
settings.
Make an internal call
Press the START key, wait for a dial tone, then dial the extension.
Make an external call
Press the START key, wait for a dial tone, then dial the number just as you would from your desk phone.
Select a line
If multiple lines are available, your telephone system may require you to select a line before dialing a
number. Press LINE and the number key corresponding to the desired line. You will hear a dial tone.
Dial a number
Once you hear a dial tone, press the number keys to dial the number.
Answer a call
The handset will ring or vibrate to alert you of an incoming call. Additionally, a line indicator on the
display may flash and the display may show information about the call, such as the caller’s name and
extension.
To answer a call, press the START key and hold the earpiece to your ear. You may also activate the
speakerphone by pressing the Spkr softkey or use a headset.
Answer a call on a second line
If you are on a call and hear subdued ringing, a call is coming in on a second line. The line number on the
display may be flashing. To answer this call, put your first call on hold and press the LINE key, then the
line number of the second call.
Answer with headset
Press any key (other than END) to answer a call when a headset is plugged in.
Silence while ringing
Press the END key to silence the ring.
Change the ring volume
Press the up/down volume buttons on the side of the handset during ringing. The default ring volumes
are set in the User Profile menus.
Adjust the speaker volume
Press the up/down volume buttons on the side of the handset during the call.