Pioneer DVR-545HX-S - Manual (Page 136)

The Video Adjust menu 15
136
En
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component (only possible when
connected using HDMI).
• BNR – Adjusts the amount of noise
reduction (NR) applied to the block noise
(artefacts visible in areas of flat colour,
caused by MPEG compression).
• MNR – Adjusts the amount of noise
reduction (NR) applied to the mosquito
noise (artefacts visible around the edges
of an image, caused by MPEG
compression).
• Sharpness – Adjusts the sharpness of
the high-frequency (detailed) elements
in the picture.
• Detail – Adjusts how sharp edges
appear.
• White Level – Adjusts the intensity of
white.
• Black Level – Adjusts the intensity of
black.
• Black Setup – Corrects the standard
reference black level (NTSC video
playback on the
Interlace video output
setting only). (Black Setup is ineffective
for HDMI output.)
• Gamma Correction – Adjusts the
brightness of darker images.
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colours appear.
4 Use the / buttons to adjust the
currently selected picture quality setting.
5 When you have all the settings as you
want them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
• YNR and Detail are ineffective for analog
and component video when the Video
Priority Mode is set to HDMI . Set to
Component to make effective for both
analog and HDMI video. See page 149.
DVR940HX_UK_EN.book 136 ページ ２００６年７月１２日 水曜日 午後４時５分