Operating by hardware buttons, Storing and recalling broadcast, Frequencies – Pioneer 2010 NAVIGATION UPGRADE SD-CARD CNSD-130FM User Manual
Page 85: Using the function menu, Storing the strongest broadcast, Storing and recalling broadcast frequencies, Storing the strongest broadcast frequencies, Hd radio ä reception
= For details, refer to Storing and recalling
broadcast frequencies on this page.
Operating by hardware
buttons
Pressing the BAND/ESC button
Band can be selected from among
FM1, FM2,
FM3, or AM.
Pressing MULTI-CONTROL up or down
You can recall radio stations assigned to pre-
set tuning keys
to
.
Pressing MULTI-CONTROL left or right
The frequencies move up or down step by
step.
Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to
, you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1
When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to
until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
2
Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1
Display the
“Function Menu” screen.
= For details of the operation, refer to Display-
“Function Menu” screen on page
2
Turn MULTI-CONTROL to select a func-
tion.
Turning
MULTI-CONTROL switches between
the functions in the following order:
BSM (best stations memory)
— Local (local
seek tuning)
— Seek Mode (seek mode) —
Blending (reception mode)
Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1
Display the
“Function Menu” screen.
= For details of the operation, refer to Display-
“Function Menu” screen on page
2
Turn MULTI-CONTROL to display
“BSM”.
3
Press the center of MULTI-CONTROL to
begin a search.
“Searching” begins to flash. While “Search-
ing
” is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to
in order of their signal
strength. When this is complete,
“Searching”
stops flashing.
p To cancel the storage process, press the
center of
MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to
.
En
85
Chapter
17
HD
Radio
ä
reception
HD Radio
ä reception