Using the touch panel keys, Operating by hardware buttons, Storing and recalling broadcast – Pioneer 2010 NAVIGATION UPGRADE SD-CARD CNSD-130FM User Manual
Page 105: Stations, Switching the xm channel select mode, Storing and recalling broadcast stations, Using the xm tuner
Using the touch panel keys
3
2
1
1
:
Switches the combination of displayed items
in the text display area.
2
:
Switching the XM channel select mode.
= For details, refer to Switching the XM
channel select mode on this page.
3
to
:
Recalls channels from the preset.
= For details, refer to Storing and recalling
broadcast stations on this page.
Operating by hardware
buttons
Pressing the BAND/ESC button
Band can be selected from among
XM1,
XM2, or XM3. This is useful for switching the
preset item.
Pressing MULTI-CONTROL up or down
During
Channel mode:
You can recall radio stations assigned to pre-
set tuning keys
to
.
During
Category mode:
The categories move up or down one at a time.
Pressing MULTI-CONTROL left or right
During
Channel mode:
The channels move up or down one at a time.
During
Category mode:
The channels move up or down one at a time
within a selected category.
Pressing and holding MULTI-CONTROL
left or right
During
Channel mode:
You can skip the broadcasting channels.
During
Category mode:
You can skip the broadcasting channels within
a selected category.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast stations
With a touch of any of the preset tuning keys
(
to
), you can easily store up to six broad-
cast channels for later recall (also with the
touch of a key).
1
Select the channel that you want to
store in memory.
2
Keep touching a preset tuning key
to
until the XM preset number (e.g.,
P.CH1) stops flashing.
The selected station has been stored in mem-
ory.
p Up to 18 stations, six for each of three XM
bands can be stored in memory.
3
Touch the same preset tuning key
to
.
The stations are recalled from memory.
p You can also press MULTI-CONTROL up or
down to recall radio stations assigned to
preset tuning keys
to
.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
En
105
Chapter
22
Using
the
XM
tuner
Using the XM tuner