Pioneer ANH-P9R-BK - Manual (Page 76)

10
Section
En 76
Audio Adjustments
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
1 Press EEQ to switch to the easy equalizer
mode.
2 Press NEXT to switch between “CSTM2”
and the other selections (curves).
3 Press the corresponding button to select
the desired equalizer curve.
Button Equalizer curve
FLAT Flat
S.BASS Super bass
PWRFL Powerful
NATRL Natural
VOCAL Vocal
CSTM1 Custom1
CSTM2 Custom2
• CSTM1 and CSTM2 are adjusted equalizer
curves.
• A separate
CSTM1 curve can be created for
each source. (The Built-in CD player and Multi-
CD player are set to the same Equalizer Curve
Adjustment setting automatically when using
the AVH-P6400CD.)
• If you make adjustments when a curve other
than
CSTM2 is selected, the equalizer curve
settings are memorized in CSTM1 .
• A CSTM2 curve can be created common to all
sources.
• If you make adjustments when the
CSTM2
curve is selected, the CSTM2 curve is updated.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
FLAT and a set
equalizer curve.
Notes
• You can also use
2 and 3 to select the
desired equalizer curve.
• If you do not operate the function within about
eight seconds, the display is automatically
returned.
Audio menu
The audio menu has the following functions:
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
• “SW2” is displayed only when the subwoofer
output is on in the subwoofer output mode
(SW1).
• “SLA” is not displayed when you select FM
tuner as the source.